Heat Reduction Coating
ThermoRad The sun's energy reaches earth as a combination of visible light that allows us to see color, infrared wavelengths that cause the most heating, and ultraviolet rays. White and light colored paints, including
roof and wall coatings reflect the visible portion of the light spectrum. Assuming 100% efficiency the best they can do is reflect 43% of the sun's energy. A much greater amount of heat, 53%, continues beyond the coating and into our living and work areas. According to the International Energy Agency, buildings currently account for as much as 40% of primary energy consumption in most of its member countries, and are also a significant source of carbon dioxide emissions.
Application is easy, it can be rolled, sprayed or brushed.
The World Business Council for Sustainable Development reports that the carbon footprint of buildings exceeds that of all transportation sectors combined. The energy consumed by building air-conditioning units can account for more than 20% of total energy consumption in some Western countries. Needless to say a primary reason for the carbon footprint is the high energy consumption which leads to higher fuel emissions by the power companies.
ThermoRad Heat Reduction Coating
Dark surfaces absorb all of the sun's energy they are exposed to. An object or surface that radiates (releases) all of its absorbed heat energy is called a "blackbody". The ratio between the energy radiated
by an existing surface to the energy radiated by the blackbody is stated as the emissivity of that
surface. Lower the emissivity higher the R-Value (commonly understood as the insulation factor). The
low-emissive paint increases the R-Value of the wall by changing the heat transfer coefficient in a positive
Reducing energy consumption, increasing energy efficiecy and promoting low emission goals are
important environmental targets for the global community. Finding energy efficient chemistries and
technologies to maintain temperature constants are a pressing issue. This fact is borne out by many
national and international standards for solar reflectance directly related to energy conservation. Liquiguard
Technologies supports these efforts with its latest innovation ThermoRad, a thermal radiation
The combination of the visible light and infrared rays equals 96% of the heat energy source. Restricting
a major portion of these two factors makes it possible to achieve energy savings of 50% or greater.
While consumers are concerned with both cost and environmental benefits derived from reduced
energy consumption, they are not always willing to do this by compromising their desire for aesthetics.
Now ThermoRad allows them to have their "cake and eat it too", while also sharing it with their neighbors,
family and friends.
ThermoRad has been formulated to reflect both the visible light and infrared radiation from the sun. It offers high solar reflectance in an unprecedented range of colors. With THERMORAD even black coatings can reach a reflection level greater than 25%, a substantial improvement over conventional black coatings that generally reflect 5 to 8 % of the sun's energy.
The figure above shows a comparison between various types of exactly color matched paints and their
solar reflectivity as compared with ThermoRad. Studies clearly show that increasing solar reflectance
can have a positive impact on a structures durability due to the reduction in thermal cycling stress. The
reduction in coating surface temperature, through reflectance, can reduce delamination and peeling of
the coating. One of the technologies used in ThermoRad (along with its unique formulation) has been
recognized by the coating industry and has the distinction of winning a product innovation award.
THERMORAD is a water based paint with the look and feel of conventional paints.
ThermoRad It is applied just as any other paint product using the same tools and techniques. Each gallon of THERMORAD will cover approximately 350 square feet with a dry film thickness of 1.5 mils. A minimum of two coats is highly recommended for optimal reflectance and durability.
ThermoRad's adhesion and water barrier properties are far superior to those of conventional paints. It is extremely fade resistant and has built-in mold, mildew and algae barriers. There are no fumes or odors associated with ThermoRad.
Tools and work area can be cleaned with fresh clean water. ThermoRad should be stored in air tight containers in temperatures between 60°F to 75°F. Properly stored ThermoRad will have a shelf life of at least one year or greater.